Electro-conductive material lineup
Extensive variety of TiO2 and ATO based electro-conductive for unlimited applications
Electro-conductive material lineup
Extensive variety of TiO2 and ATO based electro-conductive for unlimited applications
INTRODUCTION
ISK’s Electro-Conductive Materials
ISK’s electro-conductive materials use Titanium Dioxide and Antimony doped Tin Dioxide (ATO) as a major component, enabling its white or transparent color. In addition to high electro-conductivity, these materials exhibit superb absorption of near infrared rays (heat rays).
- Strength 1. White or transparent antistatic materials can be achieved
- Strength 2. A wide variety of products differing in particle size and shape
- Strength 3. Employed in a wide range of applications
Key Advantages
Key Advantages of ISK’s Electro- Conductive Materials
Core benefits of TiO2 and ATO based material:
- Applicable for light-colored and transparent formulations
- Stable electro-conductivity against humidity changes
- Permanent antistatic properties
- High chemical stability
- High heat stability
APPLICATION FOCUS
Major Applications
- Conductive primer for electrostatic coating
- Antistatic coating (building materials, floors, and films)
- Antistatic ink
- Antistatic resin and fiber and heat-shielding paint (films)
- Thermal fiber
ET Series
ET-500W, ET-521W & ET-531W
ET-500W is the Electro-conductive Titanium Dioxide which contains Antimony Tin Dioxide(ATO). Suitable applications of ET-500W are electrostatic coatings primer (Automotive) , charging rollers, toner additives, antistatic fiber and light-absorbing heat generating. ET-500W has high whiteness, chemical stability, and heat stability.
ET-521W is a product of ISK’s white electroconductive materials (ET Series) which are made of titanium dioxide with a thin SnO2/Sb layer. To satisfy the requirement of the anti static electricity in artificial fiber, ISK has successfully developed ET-521W which can be added to thermoplastic resins easily. Besides high dispersibility into the matrix of the plastic, ET-521W also provides high electro-conductivity and brighter whiteness when it is composed in bulk plastics.
ET-531W is a product of ISK’s white electroconductive materials (ET Series) which are made of titanium dioxide with SnO2/Sb layer. ET-531W has higher antistatic performance than conventional products in coatings and plastics.
| Property | ET-500W | ET-521W | ET-531W |
|---|---|---|---|
| Composition | TiO2, SnO2 (Sb doped) | TiO2, SnO2 (Sb doped) | TiO2, SnO2 (Sb doped) |
| Crystal form of TiO2 | rutile | rutile | rutile |
| Particle size (μm) | 0.2 ~ 0.3 | 0.2 ~ 0.3 | 0.2 ~ 0.3 |
| Powder resistivity1) (Ω・cm) | 2 ~ 5 | 1.3 | 2.3 |
| Specific gravity | 4.6 | — | — |
| Specific surface area2) (m²/g) | 6 ~ 8 | — | — |
| Oil absorption (g/100g) | 15 ~ 20 | — | — |
| Powder color: L value | 84 ~ 88 | 85.6 | 84.8 |
1) 9.8MPa compressed powder 2) BET method
SN-100P(x20,000)
SN Series
SN-100P
SN 100P is a transparent electro-conductive material designed for applications requiring both high transparency and electrical conductivity. It consists of antimonydoped tin dioxide (ATO, SnO₂/Sb) with an average particle size of approximately 0.02 μm. Owing to its excellent near-infrared (NIR) absorption properties, SN-100P is also suitable for heat-ray shielding applications.
| Property | SN-100P |
|---|---|
| Composition | SnO2 (Sb doped) |
| Particle size (μm) | 0.01 ~ 0.031) |
| Powder resistivity2) (Ω・cm) | 1 ~ 5 |
| Specific surface area3) (m²/g) | 65 ~ 80 |
| Specific gravity | 6.6 |
| Refractive index | 2.0 |
1) Primary particle size 2) 9.8MPa compressed powder 3) BET method
FS-10P(x20,000)
FS Series
FS 10P
This product is a water dispersion of antimony-doped tin oxide (ATO) designed to impart transparency and antistatic properties. Its near-infrared (NIR) shielding capability also makes it suitable for heat-shielding applications.
| Property | FS-10P |
|---|---|
| Composition | SnO2 (Sb doped) |
| Particle size (μm) | L 0.2 ~ 2.0 |
| D 0.01 ~ 0.02 | |
| Powder resistivity1) (Ω・cm) | ~ 100 |
| Specific surface area2) (m²/g) | 25 ~ 35 |
| Specific gravity | 6.6 |
| Refractive index | 2.0 |
1) 9.8MPa compressed powder 2) BET method
SN-100D Spherical Conductive material
FS-10D Acicular Conductive material
| Property | SN-100D | FS-10D |
|---|---|---|
| Composition | Sb dope SnO2, Water | Sb dope SnO2, Water |
| Solid Content (%) | 30.0 ± 0.5 | 20.0 ± 0.5 |
COATING SYSTEM STRUCTURE
Electroconductive Coating Systems
Electroconductive pigments are incorporated into the conductive layer of multi-layer flooring systems.
